|
Quick Setup Guide NS-20ED310NA15
20" LED 720p • 60Hz TV/DVD COMBO
START HERE
WALL MOUNT
INCLUDED ACCESSORIES
Remote control and
two AAA batteries
1
How do I attach the stand to my TV? (not for wall mounting)
How do I prepare my TV for wall mounting? (not for use with a TV stand)
You’ll need: Soft surface and Phillips screwdriver
You’ll need: Soft surface and Phillips screwdriver
+
+
B
Secure the TV stand to the TV with the
four provided screws.
A
Carefully place your TV face-down on a
cushioned, clean surface.
A
B
C
Carefully place your TV face-down on a cushioned, clean surface.
Remove the three screws that secure the stand column to the TV, then remove the stand column.
See the instructions that came with your wall mount for more information about how to correctly mount your TV.
OR
Your TV has four VESA mounting
holes on the back. If you attach a
wall-mount bracket to the back of
your TV, the bracket must be
securely attached, using all four
holes. If you do not use all four
C
Power adapter
B
A
B4 type (18mm length)
(4pcs.)
A
B
mounting holes, your TV may fall and cause property damage
or personal injury. See the documentation that came with
your wall mount for complete mounting instructions.
TV stand
Front
FEATURES
MAKING CONNECTIONS
How do I watch TV (cable, satellite, or antenna) or connect a device such as a DVD or Blu-ray disc player or game
console.
2
B4 type (18mm length) (4 pcs.)
WHICH CABLES
DO YOU HAVE?
Multi-purpose jacks: You can plug any device that uses HDMI into any HDMI jack. However,
certain devices must be connected to the ARC jack. See the instructions that came with your
ARC enabled device for more information.
Remote control sensor
Power indicator
HDMI (BEST)
Best video quality
HDMI 1
AUDIO/VIDEO OUT
COMPONENT
Note: The component and AV jacks are shared. This means you can connect
only one component or AV device at a time. We suggest upgrading to HDMI
(BEST) if your device supports it.
(BETTER)
FIND YOUR USER GUIDE ONLINE!
click Support & Service. Enter
NS-20ED310NA15 in the box under
Manual, Firmware, Drivers & Product
Information, then click
►.
OR
AV IN
COMPONENT IN
PB PR
HDMI 2
(ARC)
USB
/ AUDIO
OUT
AV (GOOD)
AUDIO/VIDEO OUT
L - AUDIO - R
VIDEO / Y
STOP
Do not plug your power cord in until all
other devices have been connected.
Note: Connect the yellow
video cable to the
green VIDEO/Y jack.
DIGITAL
OUTPUT
(Coaxial)
HDMI 1
PC / DVI
AUDIO IN
DC IN
VGA
ANT / CABLE
COAXIAL
(GOOD)
CABLE
ANT / CABLE
Before using your new product, please read these
instructions to prevent any damage.
|